Guides ยท Water tanks
Water tank stands and bases: getting it right
Water is heavy: 1 litre weighs about 1 kg, so a full 5,000 litre tank weighs about 5 tonnes. Put a tank on a level concrete slab, or on a stand designed by an engineer for its full weight.
On the ground
- JoJo recommends a 100% level, solid concrete slab at least 85 mm thick, on well-compacted ground.
- The slab should be at least 100 mm wider than the tank, so no part of the tank hangs over the edge.
On a stand
- Use a stand designed by a structural engineer for the full weight. JoJo sells stands from 1.5 m to 9 m high and advises against homemade stands.
- Height adds only a little pressure, about 0.1 bar per metre, so a 3 m stand gives about 0.3 bar. That's much less than mains pressure, so most homes need a pressure pump for normal showers and taps.
Placement
- Near a downpipe if you'll catch rain, with room to reach the tap, the inlet and the pump.
- Send the overflow away from walls and foundations.
- If the tank connects to the house plumbing, use a registered plumber and check your municipality's rules: tank water must never be able to flow back into the municipal supply.
What to put in your request
- The tank size, and a slab or a stand (with its height)
- A pump and installation, if needed
- A photo of the spot and the access, your suburb, and when you need it